Standard CLNE calibration solutions
CLNE calibration solutions are made from high quality, controlled raw materials with the help of our experts. Primarily for water analysis measurements,
for instruments used to detect the presence of differential ions and contaminants, such as water analysers, photometers, pH meters, conductivity meters, TDS meters, etc., are manufactured according to a safe procedure.
CLNE calibration solutions are available in 500 ml and 1,000 ml in concentrations of 100 µg/l; 250 µg/l; 500 µg/l and 1,000 µg/l.
Our standard solutions
- Calibration solutions Ammonia-N
- Calibration solutions Arsenic (III) *
- Calibration solutions Fe (II)
- Calibration solutions Phosphate (V)
- Calibration solutions Chromium (VI)
- Calibration solutions Manganese (II)
- Calibration solutions Nickel (II)
- Calibration solutions Nitrogen and Phosphate
- Calibration solutions Copper (II)
- 100 µg/l; 250 µg/l; 500 µg/l and 1,000 µg/l
* - at concentrations of 20 µg/l; 80 µg/l; 100 µg/l
Proper storage of calibration solution
Proper handling and storage are important to ensure that the calibration solution retains its quality for as long as possible.
The calibration solution can easily become contaminated, especially if you are not using a clean instrument. Do NOT do this, as a contaminated solution will no longer allow accurate calibration, i.e. measurements will not be reliable. Always measure only the required amount for calibration and then carefully seal the storage bottle.
Store the calibration solution in a cool place away from light, do NOT freeze.
CLNE solutions are clearly labelled with the batch number and expiry date, and the caps are hermetically sealed to ensure the quality of the solution.

