CLNE storage solutions are specifically designed for pH and ORP electrodes.
Our products include general and application-specific cleaning solutions and storage solutions for the maintenance of electrodes and probes, electrolyte solutions for rechargeable electrodes and various pre-treatment solutions.
Why is the storage solution needed?
The storage solutions are made from high quality chemicals to ensure optimal performance of the pH and ORP electrodes. It is important that the pH electrode is stored in an appropriate solution to ensure that the glass membrane of the pH electrode remains hydrated.
It is important to always use the prescribed storage solution, never store electrodes in distilled or deionised water.
CLNE storage solutions are specifically designed to minimize microbial growth and prevent any negative effects of diffusion/osmotic effects by storing the probe in the solution containing the electrolyte.
If the pH and/or ORP electrodes are stored in storage solution, the membrane remains clean. Maintaining a hydrated and clean membrane helps to ensure fast and reliable measurements. If you are cleaning your pH electrode with a suitable cleaning solution, we recommend that you soak the electrode in the storage solution for at least one hour before measuring.
Using the electrode storage solution
A suitable way to store the electrode is to place the electrode in a small bottle filled with storage solution or to place the solution in the protective cap. It is also recommended to rehydrate the electrode after the cleaning procedure, i.e. keep the electrode in the storage solution for at least one hour of soaking before taking measurements.
Preventing clogging of the permeable membrane (junction) and rapid response of the electrode can be ensured by proper storage. The sensing sphere should be kept clean and moist at all times, for which CLNE storage solution is recommended.
Click
How to store the electrode properly
Put enough solution in the protective cap of the electrode to cover the junction, then place the cap on the end of the electrode. In the absence of a storage solution, a calibration solution of pH 4,01 or 7,01 may be used. The electrode must not be stored in solutions above pH 7,01 or in distilled or deionised water!

